Transaxle 2WD - RC233

SPECIFICATIONS

• 6 speed sequential gearbox with reverse gear

• Aluminium gearbox casings

• O-Ring sealed casings

• Straight cut teeth and ground teeth

• Fixed 1° gear on the gearbox main shaft: from 2° to 6° gear slide - on type

• Teeth tickness = 13mm

• Final drive ratio 9/40 (ratio 4,44) 11/43 (ratio 3,90)

• Several solutions of gear ratios

• Splash type lubrications

• Plate type limited slip differential (external just preload)

• Hydraulic slave cylinder

• Outputs shafts for CV joint or on customer request

• Clutch shaft on customer's request

• Mass = 48 kg (without bellhousing)

• Maximum torque admissible about 450 Nm